The main purpose of the industrial gas generator set is to provide safe, reliable and efficient energy solutions for a variety of industrial and commercial environments with potential explosion risks. The design and manufacture of the gas-fired generator set take full account of the explosion-proof safety requirements, so that it can operate safely in various flammable environments.

What are the uses of industrial gas generator set?

First of all, the main use of industrial gas generator set is to provide stable power output for various places that need power. Whether it's a factory production line, a warehouse, a hospital, an office, or a facility in a remote area, this gas-fired generator set can quickly start up and generate enough electricity to meet basic electricity needs. In the case of power supply interruption or insufficient, industrial gas generator set can provide continuous power supply to ensure the normal operation of the facility.

Secondly, Industrial gas generator set has a wide range of applications. It is not only suitable for industrial and commercial sectors, but also provides reliable power solutions in remote areas and areas prone to natural disasters. In these environments, where conventional power supply may be unstable or unreliable, the industrial gas generator set can be used as a backup power source to ensure sufficient power supply in an emergency.

In addition, another important use of industrial gas generator set is to provide backup heat energy for various facilities. In winter or under special circumstances, these facilities may require additional heat to maintain normal operation. Industrial gas generator sets can provide stable heat output to meet these needs.

Precautions for use of industrial gas generator set： 

一、Precautions before operation:

1.Confirm that the gas type is consistent with the gas type used by the unit

2. Check whether the gas pressure is within the specified range, otherwise it will affect the engine performance.

3. Check whether the connection of each component is firm, especially whether the gas import and export pipelines are sealed.

4. Ensure that all safety protection devices are working properly.

二、Precautions during operation:

1. It is strictly prohibited for the unit to run unattended to avoid accidents.

2. Observe the instrument panel during operation to ensure that the engine parameters are normal.

3. If there is abnormal noise or vibration, or the dashboard display is abnormal, stop the machine immediately for inspection.

4. If you need to stop for a short time, the engine should be turned to idle to reduce gas consumption and exhaust emissions.

三、precautions after shutdown:

1. After shutdown, please make sure that the gas supply is cut off, and turn off the gas switch.

2. Regularly clean the carbon deposits and exhaust gas residues inside the unit to maintain the unit performance.

3. Check the wear of each component regularly and replace the badly worn parts in time.

4. Keep the equipment room clean to prevent debris from entering the engine and causing damage.

四、 safety precautions:

1. Operators must be professionally trained and hold relevant certificates.

2. Wear industrial gloves, explosion-proof glasses and other protective equipment during operation.

3. Do not use open flames in the equipment room to avoid accidents.

4. Regularly check whether the gas pipeline is aging or damaged, and replace it in time if there is any abnormality.